4070 stainless steel swing-up door w/ slat flooring
2" x 4" spacing
Hand winch and track cover over curtains
They can be opened to create large aisles for loading in/out
They can be closed to create individual pens
Wet/dry, wean-to-finish, stainless steel, fully welded
Raised feed tube holders and telescoping drop tubes
Stainless steel, stagger mounted
Feed saver lip and handles
17,200 BTU/h
Brooder regulator panel w/ stainless steel pressure gauge
Insulated plastic, 4,000 cfm @ -0.05” static pressure
Worm gear drive, HDPE spacer - no exposed wood
250k BTU/h hot surface ignition heater
with individual valve
Gauge on drinking line
Runs 5 GPH at 15 PSI, 3’ diameter cone pattern
Located between backboxes
1/2” stainless steel, full port ball valves w/ 3/8” quick connect fitting
Solid rod at top & bottom allows gate to be flipped, bolted through wall in lieu of expansion anchors
4´ x 10´ x 4˝ - 4,000 psi wet cast
Individual electric switch at each fan
0.050” HDPE fastened w/ stainless steel nails
50” fiberglass fans w/ 3 year motor warranty
Individually replaceable
PVC water piping extended off wall to eliminate condensation streaking
Stainless steel pulse water meters, PVC mister/fogger solenoid valves
Touch screen and auto dialer
600 amp automatic transfer switch & main disconnect panel
Fixed or sliding
24” fiberglass pit fan on concrete ventilation/manure pumpout pit
Contact us to discuss your next project.
